Gate/Garage Flash Lamp
Previous Product
Order in the next for dispatch today.
In stock
CELAMP
Remote Pro
Installation Process
- Open the package and remove the product along with all accessories.
- Unscrew the antenna by rotating it anticlockwise.
- Use the bracket's fixing hole to mark two holes on the wall.
- Drill two holes with a 6mm diameter and one hole with a 10mm diameter.
- Insert expansion plugs into the 6mm diameter holes. Thread the wires through the 10mm diameter hole.
- Route the power wire and antenna through the cable holes in the bracket, then secure the bracket to the wall using the provided 4mm x 30mm self-tapping screws.
- Feed the power wire and antenna through the cable holes in the bottom base. Attach the bottom base to the bracket using the supplied 4mm x 10mm screws.
- Connect the wire and antenna to their respective terminals.
- Reattach the cover, ensuring it fits snugly with the bottom base and leaves no gaps.
- Screw the antenna back in, turning it clockwise to tighten.
- Ensure that both the bracket and lamp are installed upright relative to the ground. Installing them horizontally could allow water to enter the lamp, potentially damaging the circuit board.
