Loading

Posted by James Boyle

If you're experiencing issues with your Holden Cruze, Barina, or Trax key fob, a flat battery might be the culprit. Fret not - replacing the battery in your Holden key is a simple task that can be done at home with minimal effort. In this guide, we'll provide you with an easy-to-follow process, ensuring your Holden key is up and running in no time.

Step 1: Confirm Your Key Model

Holden keys may vary slightly depending on the model. Whether you have a Cruze, Barina, or Trax, the battery replacement process is generally the same. Identify your specific key model before proceeding. 

Make sure you have a CR2032 3V battery on hand. This coin cell battery is commonly used in key fobs and electronic devices. Check the existing battery for the CR2032 label to confirm you have the right type. If you need a replacement battery, you can find it easily at Remote Pro

Step 2: Open the Key Fob

Use a small screwdriver or a coin to gently pry open the key fob. Be cautious and take your time to avoid damaging the key casing.

Step 3: Replace the Battery

Locate the old battery inside the key fob. Carefully remove it and replace it with the new CR2032 battery, ensuring the positive side faces up. Close the key fob securely.

Step 4: Test Your Key

After replacing the battery, test your Holden key to ensure it's functioning properly. Press the buttons to lock and unlock the car to confirm the battery replacement was successful.

With these simple steps, you can easily replace the flat battery in your Holden Cruze, Barina, or Trax key. Remote Pro offers quality CR2032 batteries, ensuring a reliable solution for your key fob needs. Enjoy the convenience of a responsive key, and hit the road with confidence. Happy driving!